CatX Mini AV
CatX Mini AV Tx/Rx (Video and audio over Cat5/6 UTP cable)
CatX Mini AV units provide a unique solution for transmitting VGA video and audio over Cat5/6 UTP cable up to 150m. CatX Mini AV receiver units always require an external power supply. All CatX AV units are Video compatible with CatX Mini VP transmitters and receivers.
To see how CatX Mini compares in size to a VGA×cable connector click HERE
Features
Self powered
CatX Mini AV Tx can be completely self-powered, if connected to a DDC2B (or later) compliant VGA source
The CatX Mini AV Rx receiver requires an external power supply.
Transmits High resolution VGA up to 150m
The CatX Mini is specifically designed to transmit the video from a VGA source to any VGA video display unit, such as TFT, LCD, Plasma or Projectors up to a distance of 150m.
SVGA output up to 2048 x 1536
Designed to provide a sharp high quality video at up to 1500m, the unit performs best using low cost Cat5 cabling.
Zero foot print
CatX mini units are not much bigger than a VGA connector, and the Transmitter unit is designed to be connected directly to the VGA source. As such they can be easily fitted to both source and output display in environments where space is limited.
High quality Audio
High quality audio transmission is also available on CatX Mini AV units.
Technical Specification
| CatX Mini AV Tx | 15HD Male, RJ45 with power & Status LED, 1.3mm DC Jack, 3.5mm stereo Jack |
|---|---|
| CatX Mini AV Rx | 15HD female, RJ45 with power & Status LED, 1.3mm DC Jack, 3.5mm stereo Jack |
| Maximum Distance | 150m of Cat5/5e/6/7/8 UTP cable |
| Resolutions | . |
| 150m | 1280x1024 |
| 100m | 1600x1200 |
| 60m | 1920x1440 |
| 40m | 2048 x 1536 |
| VGA Video | 75 Ohms input/output VGA --- UXGA compatible; 1080P compatible |
| . | RGBHV, RGSB, YUV, Y/C, CVBS formats supported |
| . | Separate or composite HV; Horizontal 15-130KHz Vertical 30-150Hz |
| Audio input | Stereo unbalanced, Max. 3.5V p-p |
| Audio output | Summed Stereo |
| External Power | Optional with CatX Mini AV Tx |
| . | Required for CatX Mini AV Rx |
| . | 5V @ 0.05A |
| Housing (W x L x H) | Chrome plated steel- 34mm x 54mm x 16.5mm |
| Operating Temp. | 0 - 50 oC non Condensing |
Considerations for Use
CatX Mini AV (Tx and Rx) are usually supplied as a pair.
CatX Mini AV units are ONLY Video compatible with CatX Mini VP. CatX Mini AV Rx (receivers) always requires a power supply to operate.
All VP and AV units have a 5Volt DC power socket, so that a power supply can be used if required.
Please Note: CatX Mini transmitters and receivers are NOT compatible with any other CatX units
Downloads
Product/ Technical Specifications
CatX Mini VP and AV
(updated: 02 Jul 2008)
